Fused R.C. Solutions
Cr18P evo pro/ juice up and furitek fx118 "fused" skid printed in Carbon fiber nylon pa12cf
Install is very simple, but the mounting screws are changed. Please use alignment pins and be sure you are using the correct holes in the frame rails, see pictures.
Works with stock and high clearance links. Stock upper link mounting position may need to be slightly adjusted vs what we have pictured with the high clearance links.
The skid designed to get you to the next obstacle.
Entire motor/transmission moved forward and tipped for better cog
Lower link mounting locations improved, fixed any driveshaft rub with high clearance links and fixes the axle angle needed to achieve full clearance with the driveshafts
Improves breakover angle
Provides a smoother profile to eliminate hangups
2.8mm of ground clearance gained at the skid by moving it and angling it forward slightly.
Approx .75mm of skid material protruding from the chassis to help prevent the aluminum chassis from creating friction and sliding.
While this is a direct fit, you may be required to move the position of your links/servo. We provide our positions used here, but we do use high clearance links and a ramp crab servo mount. It will work with stock and aftermarket parts combinations and very well with high clearance links but depending on your set up, some minor adjustments may need to be made. Let us know if you have questions!
Compatible with all of the cr18p parts from Fused RC
